The aluminum cup or plastic cup to be produced is placed neatly on the tube bucket, and automatically inserted into the cup holder (positioning die) through the cup dropping device. The cup holder is driven by the turntable and stays at different stations respectively. The powder that needs to be filled is put into a sealable conical barrel, and the plastic cup that stays intermittently on the filling station is accurately and automatically injected through a screw type quantitative filling valve directly connected with the barrel. The chain plate continues to rotate, and the plastic cup that has been filled with powder is quickly taken to different stations. The filling head of each station can feed the plastic cup. Different filling capacity can be obtained by adjusting the number of servo turns on the touch screen, and the sealing work of different cup sizes such as aluminum cups and plastic cups can be completed by replacing different copper heads -----------------------                                                                                                                                                              filling accuracy  ≤±2% hopper volume 15L  productivity 2100pills/hour suitable cups single cup, nespresso, lavazza  filling range 5--15g Power supply  Single phase 220V,  2KW Main motor power  0.2KW heating range 160--300 C air pressure 0.6-0.8MPA Air consumption 0.4(m3/h) Noise <70db Dimension (LXWXH) 650X650X1800mm Machine weight 300kg Nitrogen flushing available